Brakelight fault display

**DARREN R** · 28th July 2012, 22:51

hi guys anyone got any idea why the display is showing a bulb fault when all are working ok ?

**GazVXLINE170** · 28th July 2012, 22:52

The bulb is about to fail in all likelyhood. Mine does it.

**DARREN R** · 28th July 2012, 22:58

annoying the crap out of me been like this for weeks now

**rjw** · 28th July 2012, 22:59

are you sure the correct brake light hasnt failed, and its using the other bulb on the cluster to act as brake light. Took me ages to realise this until i noticed my brake lights were uneven!

**DTi Elite** · 28th July 2012, 23:01

turn the lights on & go to the rear of the car there should be 2 bulbs each side lit up , the top one each side is the brake light as well (bulbs are single filament) so if the tail light part is working then the bulb is ok .

ijk571 · 28th July 2012, 23:02

Originally Posted by GazCDTI150

The bulb is about to fail in all likelyhood. Mine does it.

Can it predict the lottery results for me next week please?

**vectra ste** · 31st July 2012, 23:15

Originally Posted by DTi Elite

turn the lights on & go to the rear of the car there should be 2 bulbs each side lit up , the top one each side is the brake light as well (bulbs are single filament) so if the tail light part is working then the bulb is ok .

what he said

mine was the same