mas re-map this morning

[mrk]

ben did his magic this morning,took about half an hour.took the car out for a run and omg cant believe the difference.i expected a big lump of power coming in all at once but it feeds in right across the rev range,
the rev counter now flies round in all the gears. looking down at the speedo i thought i was doing about 65 saw i was actually doing nearly 90
i will have to keep an eye on speed or losing license is possible.
so all in all very happy with it.obviously fuel consumption is now down to 32 from 43 but i assume this is down to my driving not the map. cant recommend mas too highly.may now look at the next stage decat etc

[mtqn]

ben did his magic this morning,took about half an hour.took the car out for a run and omg cant believe the difference.i expected a big lump of power coming in all at once but it feeds in right across the rev range,
the rev counter now flies round in all the gears. looking down at the speedo i thought i was doing about 65 saw i was actually doing nearly 90
i will have to keep an eye on speed or losing license is possible.
so all in all very happy with it.obviously fuel consumption is now down to 32 from 43 but i assume this is down to my driving not the map. cant recommend mas too highly.may now look at the next stage decat etc

I really wanna do this to my 3.0litre CDTI V6! Remap...but not sure if it will damage the engine as i have heard someone say that the 3.0 doesnt really cope well at all with the remap and the gearbox goes....
some clarity would be great!!

Nice one mrk

[BigWilko]

I really wanna do this to my 3.0litre CDTI V6! Remap...but not sure if it will damage the engine as i have heard someone say that the 3.0 doesnt really cope well at all with the remap and the gearbox goes....
some clarity would be great!!

Nice one mrk

It would seem there is no clarity on the V6. The numbers say one thing and people say different. Some have had no problems, some say they have. Seems like a risky business to me

[mtqn]

yeh, i think i may just leave it!! I have a MG ZT 1.8t (160)..I may just play around with that..a remap will give it 198 BHP! Not bad...

[rockafella8587]

I had a zt-t last year, v6 160, o miss the exhaust note lol. Are you on 75andztowners ? I used to be.

To the op, I have bens map on my vectra too, best mod I have ever done lol! Enjoy!

[mtqn]

I had a zt-t last year, v6 160, o miss the exhaust note lol. Are you on 75andztowners ? I used to be.

To the op, I have bens map on my vectra too, best mod I have ever done lol! Enjoy!

Nah im not on that forum. I can hardly keep up with this one! There needs to be a notification of some sort (email) for people to check up on threads...i forget and then forget again!!

[John LE]

Nah im not on that forum. I can hardly keep up with this one! There needs to be a notification of some sort (email) for people to check up on threads...i forget and then forget again!!

You can subscribe to a thread by clicking "Thread tools" at the top of the posts

[mtqn]

You can subscribe to a thread by clicking "Thread tools" at the top of the posts

Thats made my day!! Fantastic!!!

Thanks John

[paulvectrac]

The 3.0cdti does tune well I have done quite a few never had any problems as yet touch wood it only takes one I suppose as I say all the ones I have done have being fine and are alot more refined for driving

[mtqn]

The 3.0cdti does tune well I have done quite a few never had any problems as yet touch wood it only takes one I suppose as I say all the ones I have done have being fine and are alot more refined for driving

Interesting. Thanks.

What is the increase in BHP and Torque?? I believe my Auto 3.0 cdti is 177BHP. Figures would be great. Also if i get a remap on it will it sort my EML light problem? Or do I have to sort the EML problem out first?? The car drives fine but it just wont pull!!