So I brought a sump plug and a new socket and this thing is stiff as they come I cant get enough purchase from the front of the car and its doing my nut in. Some numpty has air gunned it on probably. I need a ramp
So I brought a sump plug and a new socket and this thing is stiff as they come I cant get enough purchase from the front of the car and its doing my nut in. Some numpty has air gunned it on probably. I need a ramp
Bar on the socket pipe on the bar loads of purchase
I'm going to source a breaker bar and do it that way.
That much force on a t47 is not gona end well!
With him mentioning a socket presumed it was a hex head,your right though wouldn't recommend this method with a torx
What force with a torx? its the only way to undo it? I have a new sump plus so I just need it out.
Not a typo its actually a t47 not 45 as snap on advertise it for use with Vauxhall sump plugs. Try your 45 next time and you will see it's a little loose in there.
If it's in there for good, there are other ways of getting the oil out, see:
http://www.vectra-c.com/forum/showth...ump-experience
I haven't got one, but there use seems to be quite common...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks