Replacing a door?

[lee gsi]

How easy is it to replace a front door on a Signum (Or Vectra)?

[Das]

Easy peeesy. 2 small grub screws on the hinges, the bar that links door to A pillar and then the electrical connector and it should lift off.

[rushy]

Easy peeesy. 2 small grub screws on the hinges, the bar that links door to A pillar and then the electrical connector and it should lift off.

As said, very easy mate, you wont even have to line up gaps.

[Big Red]

Just did mine on tuesday mate as someone drove into mine when was in shop. As above dead easy all you have to change is the central locking box held on by three torx screws and if its a door from scrap yard i believe the block connection goin to electric window switch is different on pre face to face lift
Hth

Cheers
Stu

[lee gsi]

Its probably going to be a bare door so will have nothing inside so would need to swap over the electric window motor, door, loom etc.

Is that easy enough?

[plasma]

yep, all easy enough

[EVUL]

Is it just as easy to do a rear door replacement , Apparently a Brick pillar jumped into the side of the Mrs' Signum

I have the door but its come with no door mechs inside or glass

How easy does the window mechs come out , am I going to loose some flesh .


Thanks

[EVUL]

Well thats was easier than I thought it would be , fiddliest bit was getting the Clip thing that secures the window to the mechanism thing back in .


Thanks for all the help guys


Its even a spot on colour match

[lee gsi]

I am still waiting for a Saturn Blue door to turn up on ebay not to far away.

Nice to know its not hard

[EVUL]

I reckon now I know how it'd only take an hour tops .

The little black grommit that holds the window to the mech was a buggar . One of mine broke getting it out , luckily I found 2 of them in the replacement door



I got mine on ebay from VauxhallHeaven
http://myworld.ebay.co.uk/vauxhallhe...id=p4340.l2559



Free Delivery too and it was really well packaged