hello

[daveb46]

hello every 1 im totally new to this the reason i joined the group coz i read a post about the dreaded swirl connecting rod on a 1.9cdti falling off ive had 2 new inlet manifolds fitted because of this same fault some 1 mentoined a quick fix of super glue and gasket sealer can any 1 tell me how that works or what to do as im at me tether coz its an awful design and manufacturing fault thanks

[Niall83]

Hi and welcome. Enjoy your stay. What model to you have and get some pics up. Hope you have deep pockets cause you going to get caught up in the modding bug here lol

[markmac21]

hello and welcome , this forum is fantastic , it is a wealth of information and always great people with good advice
, if you have a problem some one on here will of had it before you and be able to advise ... its great and addictive

[Gubmint Agent]

Welcome along. Got any pics?

[Mark Evison]

Welcome to the site

[daddyjay]

welcome to vec-c.

[130786howe]

Hi and welcome. Enjoy your stay. What model to you have and get some pics up. Hope you have deep pockets cause you going to get caught up in the modding bug here lol

ive caught that bug its contagious to

[Даниил]

[daveb46]

hello every 1 and thanks for the warm welcome , ive actually got two cars both cdtis 1 is a zafira that im having trouble with i can be driving a long when all of a sudden the car loses power and gos into limp mode grrrrr but the only code i get is p0500 i was getting a p0380 code found that glow plug in cylinder 3 was down so i changed it that code has now cleared can any 1 shed any light on my problem i must add the swirl connecting rod had fallen off i put it back on cleaned out the egr valave replaced the intercooler seals coz 1 had split dont know what elese i can do except ask for help in solving my total loss of power issue i was told need new inlet manifold ?