remap booked in at mas performance

**jonny22** · 26th November 2012, 20:22

Well rang Ben today and booked my Cdti 150 in for a remap. I've already blanked the egr valve off and derestricted the airbox and put in a k&n panel filter.

Previous owner had rr results off 189bhp and 280lbft of torque with a dtuk green box so I'm expecting similar figures but wouldn't mind the bhp in the 190's and torque in the 290's. Should be a transformed car once done

**GazVXLINE170** · 26th November 2012, 20:25

Good stuff, I would say you're looking at 188-193bhp and 400Nm (295lb-ft) of torque.

**mrk** · 26th November 2012, 20:47

he did mine m8 you'll not regret it.

**jonny22** · 26th November 2012, 21:38

I'd be happy with those figures like with a nice smooth power curve. And what power did u get mrk?

**messermitch** · 26th November 2012, 23:10

Ben did mine, take a look at this thread http://www.vectra-c.com/forum/showth...BHP&highlight=

Theres some pictures of the graph on there too

**nutron** · 27th November 2012, 01:42

Ask them to give you road wheel figures from before and after.

**jonny22** · 27th November 2012, 07:47

Yeah I'm going to get a before and after figure so I can then compare the map with my old green box

**nutron** · 28th November 2012, 15:58

Important to get road and fly figures for an accurate comparison. You could produce a much higher flywheel figure from the same flywheel figure without changing a thing on the car.

**jonny22** · 28th November 2012, 21:27

Originally Posted by nutron

Important to get road and fly figures for an accurate comparison. You could produce a much higher flywheel figure from the same flywheel figure without changing a thing on the car.

Ok I will do and let u know how I get on