I have seen an estate rear valance with the holes for parking sensor holes for sale.
What size are the vx Parking sensors?
I am wondering if I can get a generic kit and fit them in the genuine VX holes on the valance?
I have seen an estate rear valance with the holes for parking sensor holes for sale.
What size are the vx Parking sensors?
I am wondering if I can get a generic kit and fit them in the genuine VX holes on the valance?
Think to remember the OEM ones are 28 or 29 mm.
Vx holes are bigger than almost all the aftermarket ones. I had fitted my own sensors then had the bumper replaced after a shunt but they supplied a bumper with holes, thinking that I must have had factory sensors. I had to pack out my sensors to fit the holes.
They're 24mm, got my new mounts sat here waiting to go into my new rear skirt, but have only got a 21mm hole cutter so am waiting for a 24mm one to arrive.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
So I need to find some 24mm sensors then...
Most on ebay seem to be 21mm.
I have seen these Cobra ones http://www.cobravehiclesecurity.co.u...ter-a0158.aspx
They are 25mm so might work with a little persuasion.
Though the cheapest I have seen them is £75.
Seems to be pretty unique to Vauxhall ones that I've found so far. All aftermarket ones seem to be 21mm.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
Try these.
http://www.ebay.co.uk/itm/REVERSING-...item5ae27c06d1
I bought these when i got a new rear bumper from the Bay..The bumper i got had Factory sensor holes and these sensors fit ok..They are 22.5mm but they seem to fit ok..
I borrowed the tool from a mate at vx. It was 22mm
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks