DT UK fitting instructions to a Vectra CDTI

**gibba** · 19th June 2012, 18:31

Good Evening Guys,

I have recently bought a DT UK box for my cdti 120 vectra and I am not very mechanically minded when it comes to anything other than a classic mini. How do I locate where the plugs go into? Can anybody help with info / pics etc.

Thanks in advance,

Gibba

**XPCobra** · 19th June 2012, 19:00

fuel pressure rail sensor, normaly on the end of the fuel pressure rail.

**DAVIDD88** · 19th June 2012, 19:03

There's a how to for 120 as its diffrent from 150

**gibba** · 19th June 2012, 19:05

Thanks for your help XP Cobra I will have a look in the morning. Is the fuel rail situated under the engine cover? do you know if it as at the left or right. There is two plugs does one plug unplug out a socket and thats what the spare is for? Thanks again

**gibba** · 19th June 2012, 19:18

Originally Posted by DAVIDD88

There's a how to for 120 as its diffrent from 150

Thanks for the help DAVIDD88 looks quite simple I will hook it all up tomorrow morning and see if it was worth getting or not.

Thanks again for your help