headlight connector fault ?

[mrk]

fitted angel eyes and very happy with them .now a week later all lights on drivers side
not working .i removed light and wiggled connector and they work intermitemtly
i refitted origional light to check and it worked fine. now unsure what to do.
i can try a new connector if available from dealer or send light back and stand postage
and hope it is the light
advice welcome.

[Ziggy]

At a guess Its the connector and not available from dealer. Mine did the same after a bit. Get a new connector from scrappy and use a connecting block

[mrk]

after a bit i could stand but after a week im wondering if unit could be at fault

[4ndy]

Mine does the same. The connector block inside th eheadlight unit is not secured properly and when you plug the connector on it pushes the connector block inside the headlight.

I got around it temporarily by supporting the back of the connector from inside the headlight by removing one of the bulb covers whilst connecting the plug.

[hairy31]

cheap lights I'm afraid.........and yes mine are copies.....I glued the inside plug back in place - solved the problem

[mrk]

cheap .....perhaps but still £160 so not sure what to do
might as well try fixing it if replacement will do same
thanks for imfo chaps

[mrk]

double post

[hairy31]

cheap .....perhaps but still £160 so not sure what to do
might as well try fixing it if replacement will do same
thanks for imfo chaps

ok perhaps worded wrongly.............chinese mate so not oem

[mrk]

no worries mate
loving what you ve done to your car

[mrk]

no worries mate
loving what you ve done to your car