which exhaust best for a vectra turbo

**davedave** · 28th April 2012, 18:11

hi got a vectra turbo and want a new exhaust any ideas , ive seen the scorpian

**accveccysriturbo** · 29th April 2012, 09:08

What else you got planned for the veccy?

Call a few local places and see what they say. Most people have gone for a 2.5" system into free flowing back boxes. Some have done 3" systems.

Depends what you want. If you look at the big tuners for this engine most state a 2.5" system is more than sufficient for the car and power.

I had mine done at MIJ in Walsall and can not fault it at all.

**davedave** · 29th April 2012, 09:55

hi there yes having it lowered next week by 35mm. then putting exhaust on seen a scorpian full system

**accveccysriturbo** · 29th April 2012, 15:26

If you don't really plan on doing much else to it going forward I wouldn't go above the 2.5" system then mate. What are the dimensions of the scorpion system and what are the costs?

**davedave** · 29th April 2012, 15:52

Hi it is a stainless steel scorpion exhaust system with pipe diameter of 57mm/2.25 , and tail pipe 2x90mm rounds.

**davedave** · 29th April 2012, 16:17

hi costs £500 cheers

**R2XPT** · 29th April 2012, 16:21

I had a scorpion tubo back system on my cdti and was excellent cant fault the quality and sound!

**accveccysriturbo** · 30th April 2012, 14:08

Originally Posted by davedave

Hi it is a stainless steel scorpion exhaust system with pipe diameter of 57mm/2.25 , and tail pipe 2x90mm rounds.

So it's the same diameter as the standard system then.

£500 does that include fitting?

Phone a few places you will get a custom built one fitted for less than that.

My system is 2.5" down pipe, into 2.5" straight through, into 2x 2inch free flow boxes at the rear. Lifetime guaranty £425. MIJ in Walsall