Red flap pictures.

**IrishFireman** · 5th April 2012, 10:59

I took out the glove box and this is the red flap held with a cable tie. can anyone upload a pic of theirs and show me how to fix please. 3 weeks now without cold air

Whats servo do i need to buy, theres none attached!

**IrishFireman** · 7th April 2012, 20:37

bump

**Critch** · 7th April 2012, 20:49

It attaches to a motor below

Take the plastic panel off next to your right foot if you sit in passenger seat.

And should see the motor about the size of packet of fags

**Damo77** · 8th April 2012, 12:45

As Critch has mentioned

More info+pics in this thread mate

http://www.vectra-c.com/forum/showth...t=41212&page=2

Damo

**Damo77** · 8th April 2012, 20:06

Part Number is in this thread chap :-

http://www.vectra-c.com/forum/showth...ighlight=servo

13192012 - MOTOR, SERVO, WITH COUPLING ROD, AIR MIXER FLAP TIMING (Note:-FOR MANUAL AIR CONDITIONING)

They work out to be around the £100 mark on Vauxhall World Parts

Damo

**Critch** · 8th April 2012, 20:29

Or a fiver from local scrappy ;-)

**Damo77** · 8th April 2012, 21:02

As luck would have it in your case Critch

Going to have to do the same now as my Recirc Flap Servo started clicking last week

Gotta be one of the most awkward things I've ever had to remove

**Critch** · 8th April 2012, 21:12

Originally Posted by Damo77

As luck would have it in your case Critch

Going to have to do the same now as my Recirc Flap Servo started clicking last week

Gotta be one of the most awkward things I've ever had to remove

If you strip the motor down carefully and move the cogs around maybe one with a missing tooth or something it might work again.

When mine broke I managed to strip it and reposition it so that I got all the cold and about 1/3 of the hot.

**Damo77** · 8th April 2012, 21:17

Yeah tried that but unfortunately it was all in vain.

Almost went as far as to try break the damaged tooth off completely and file another in place (as per the tooth brush thread in the HOW-To section) but found that two of the cogs were damaged.

If its not one thing its another with this car lol

Thanks for the tip though mate

**Critch** · 8th April 2012, 21:26

Originally Posted by Damo77

Yeah tried that but unfortunately it was all in vain.

Almost went as far as to try break the damaged tooth off completely and file another in place (as per the tooth brush thread in the HOW-To section) but found that two of the cogs were damaged.

If its not one thing its another with this car lol

Thanks for the tip though mate

Gutted, yeah I no the feeling mate, it would be nice to have a month where I don't spend money on it lol

MOT this month, tax,and needs new tyres aswel