Hello there everyone,
Since ive had the car, about 2-3 months, there is one thing that seem to be a bit tricky, getting an accurate oil reading on the dipstick.
the car was serviced oil change etc just before i bought it, so it should be fine.
But.. it has to be one of the worst designs because the tolerance of high/low oil is so fine you cant really tell. (imo)
when i pull the dipstick out, clean it, re insert it, and then check again, its covered with oil except for a patch at the back of the gauge, whats the deal with that?
any ideas?
hope ive explained myself well enough
Bookmarks