I have just finished fitting my 07 veccy with a towbar and now have the issue of the wiring. I was supplied with a bypass relay but no instructions of how to fit it.
I have just finished fitting my 07 veccy with a towbar and now have the issue of the wiring. I was supplied with a bypass relay but no instructions of how to fit it.
Should just plug in to the slot in the rear fuse box
Shout if you need a photo... dijm@btinternet.com
Mine didnt need anything altering or turning on in the software..
When I removed my wittier one last year there was quite a few wires joined up and a couple of different boxes. I'd suggest contacting whoever manufactures the toolbar they probably do a guide. I wouldn't chance it unless your 100%
If you have a generic bypass relay that is just standard to any towbar,
you will need to connect the wires to each of the light feeds from the rear fuse box.
There will be a wiring diagram somewhere to show you what colour goes where, but you will have to trace the wires out in the vectra.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks