as above, but using the button on the drivers door only makes a noise doesn`t make any difference with the boot door, and the button on the remote doesn`t do anythin either, would i be right in sayin it could be a fuse, if it is which one?
as above, but using the button on the drivers door only makes a noise doesn`t make any difference with the boot door, and the button on the remote doesn`t do anythin either, would i be right in sayin it could be a fuse, if it is which one?
What do you mean? if you dont have electric tailgate.. all the buttons do is unlock it.. but not open.. and if working on some of them, then its pretty difficult to find, as its linked togehter with the central locking all the bits you mention there..
Its not a automatic boot opener. All the buttons do is unlock it, then you have to go out of the car and open the boot by hand!
I dont make a sound besides a "beep" you have to go out and press the button to open it.
the "beep" only unlocks it.
hi ive just got same issue on signum, you unlock car & boot pops but i then press on boot release pad & it wont un lock from the catch ,
so i then push it down to close which it does then either press door buttons or remote button & get nothing just the beep or me indicators flash as normal to say i pressed button on remote,
but if i unlock it via say the fail safe key hole on inside of boot it opens ( this is no good if boot is full & cant get to the slot),
so my question is there a solenoid thats packed up or is it the boot release pad / switch playing up
ah just read this thread , seems to solve it for most http://vectra-c.com/forum/showpost.p...4&postcount=13
unless its the micro switch but if read thread that is also discussed & tested
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks