Rear electric windows

[Chewy72]

As above is any wiring in the doors already or does it need putting in

[plasma]

You probably wont have the wiring in the body loom of the car, and you definitely wont have it in the back doors already.

Have a search for rear windows on here. Plenty of threads..

[Mike1.9CDTI]

open the rear door and locate the plug.


unplug it from the door and check you have both of the larger pins in the plug


if you have both then the body is wired,sadly the doors will need to have the wiring changed when the motors are added

[LeeU]

It is easier if the body wiring is already in place but it isn't really a show stopper, it takes a few hours to unpick the wires you do need from an old wiring loom and it also gives you the option of adding things like heated front seat wiring too.
The hardest part of this is that you need to remove your front seats and side covers but it isn't really that bad.

[Chewy72]

The car a 57 plate Sri xp so hope loom is there will have a look and report back cheers

[Big-Pete]

I had the wiring in my 57 plate SRi Nav XP, But i was told that may have been because I also had rear parking sensors, IDS+ etc, Hopefully you'll be lucky Chewy

[Penfold101]

My 57 plate XP2 has them, but it's also got AFL and parking sensors...

[Chewy72]

Mine hasn't got nav but has got reverse sensors

[Chewy72]

Look at the wiring like mike shows but it only has one terminal not the two as shown so ideas please guys thanks

[soulman]

well that means a new loom needs fitting ...that means both front seats out ,handsbrake section out ..then all your window bits ...a full days work .