Hi
Still having probs with my f40 gearbox crunching 1st to 2nd and 2nd to 3rd.
I've changed the gearbox oil only putting 2.4ltrs in and reset the sincromess and its no better.
Can anybody help
Thanks
Andy
Hi
Still having probs with my f40 gearbox crunching 1st to 2nd and 2nd to 3rd.
I've changed the gearbox oil only putting 2.4ltrs in and reset the sincromess and its no better.
Can anybody help
Thanks
Andy
They just crunch i think mine does sometimes when cold but is alot better when warm
If its only when cold I wouldn't worry.
Their is a fix I remberd seeing on auto data.
Butsure requires new bearings
If its only when cold I wouldn't worry.
Their is a fix I remberd seeing on auto data.
Butsure requires new bearings
Well autodata lists :
Problem:
Difficult to change between 1st and 2nd when transmission cold
Cause;
Sliding gear sticking
Remedy;
Repair kit 9201451
note: modified gear introduced as of transmission No. GXX0320969 10/03
Ensure clutch system is bled
Ensure gear linkage is correctly adjusted
If problem still occurs fit sliding gear kit
It is not necessary to replace entire transmission
Double post
is you thermostat and sensor working ok?? mine was a porker in all gears when the stat was playing up. just a thought ;-)
Is your flywheel on its way out. Makes a massive difference to engaging gears.
Try a tube of molyslip in the box. Helps a bit.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks