what is needed to get a vxr over 300bhp

[leedslads]

i have been looking at a vxr to day like the car but wont to know what it will cost to get it over 300 bhp if any one can hlep ty

i thik it is the 250bhp
and it a 55 plate

[Ziggy]

A decent remap. (Should have change from £500) But its the Torque you want....

[leedslads]

320bhp, 350lb.ft torque
what about that m8

[MAF 3.2 V6 GSi]

A stage 1 map should give you 295-300bhp and 400 IB FT torque, costs £500-£600

Be careful who you map it with as there have been a few that have been burnt with cheap crappy maps

[ijk571]

A stage 1 map should give you 295-300bhp and 400 IB FT torque, costs £500-£600

Be careful who you map it with as there have been a few that have been burnt with cheap crappy maps

Wasn't your's pushing 400 torques at the RR recently?

[MAF 3.2 V6 GSi]

Wasn't your's pushing 400 torques at the RR recently?

440 ib ft torque, but mine has more than just a stage 1 map

[Ziggy]

<p>

320bhp, 350lb.ft torque</p>
<p>what about that m8

</p>
<p>&nbsp;</p>
<p>personaly I don't think that would be a reliable 320 and torque is a bit low. Where have you seen those figures? Given I presume your in Leeds give rs tuning a ring

[byebyeitsagsi]

320bhp would be unsafe on the clutch and for anyone to claim that from a simple remap does'nt know much about a Z28, simply not safe. 350lbft of torque sounds low.

Always go to one of the big trusted tuners for a remap as people who get people with a lack of knowledge doing it get there fingers burned.

[paulvectrac]

300and a little more

[MAF 3.2 V6 GSi]

300 BHP is not a certainty, a few 255 versions that have been recently mapped have only made 280-285 BHP