Are the lamps easy to change on the facelift sri? My bulb warning came on sunday but went out when wiggled the wires. Completely gone now.
Will it be bumper off job or can you get to it (no ramp)?
Are the lamps easy to change on the facelift sri? My bulb warning came on sunday but went out when wiggled the wires. Completely gone now.
Will it be bumper off job or can you get to it (no ramp)?
Have you checked the bulb first? I understand there is a hatch on the back of the bumper for access.
I changed mine before without the need of taking the bumper off! you can twist the back of the unit off then pull the bulb out from the back.
Access port for my foglight bulb is underneath, not at the back of the unit.
Yer good point mine was underneath as well!
Cheers for the info, thought you changrd the whole thing. What bulb size is it?
H3 i would think should have a cord attached to it
Had another nose at work and removed plug, cleaned up and pushed back in ... All working again
From what I could see there was a round bit to unscrew at the bottom, guess that is the bit to get at.
Maybe I should RTFM as it must be in there!
Cheers again all
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks