South East Rolling Road Meet At Hayes Engineering, Erith Kent 28th Jan 2012 **Results**

[MAF 3.2 V6 GSi]

Results from todays South East meet ...

1. Paulmac - 308.2 BHP and 422 lb ft torque, Vectra VXR
2. Rich - 307.8 BHP and 416 lb ft torque, Vectra VXR
3. MAF (Mario) - 304.5 BHP and 440 lb ft torque, Vectra VXR
4. Ian - (Soulman) 281.5 BHP and 372 lb ft torque, Signum 2.8 V6 T
5. Graeme - 273.7 BHP and 319 lb ft torque, Astra VXR
6. Jim - 244.5 BHP and 280 lb ft torque, Vectra VXR
7. Nutron - 229.4 BHP and 347 lb ft torque, Vectra 1.9 CDTi
8. Mads - 184.3 BHP and 286 lb ft torque, Vectra 1.9 CDTi
9. Chris - 183 BHP and 342 lb ft torque, Seat 1.9 diesel
10. Steve - (Smudger84) 163.1 bhp and 176 lb ft torque, Vectra 2.2 Direct
11. James - (Penfold) 155.8 BHP and 285 lb ft torque, Vectra 1.9 CDTi
12. Ian - ( irk354 ) 154.6 BHP and 170 lb ft torque, Vectra 2.2 Direct
13. Keefyb - 149.9 BHP and 147 lb ft torque, Vectra 1.8
14. Steve - (shb1988) 134 BHP and 242 lb ft torque, Vectra 1.9 CDTi (120 Version)

As I said a great day and I hope I have got everyone's name right and the figures they achieved, if not let me know...

Steve, get those pictures up mate ...

[Mads]

it was a good day, freezing cold though. thanks for sorting it out I liked Khalids car boot sale

[soulman]

cheers again mario .....soome great figures by all today I think ...

liking the beating of 2 VXRs lol

[MAF 3.2 V6 GSi]

cheers again mario .....soome great figures by all today I think ...

liking the beating of 2 VXRs lol

You smashed them mate

[soulman]

glad you enjoyed your lil drive at the end ...and yes your not to far behind in the torque side of things ...

[nutron]

Not happy with those figures obviously, not seen a torque figure that low in years. There is a leak on the waste gate mount that might have slowed spool up a little but they did not listen to what I told them as usual. My car is not ergonomic and going full throttle at 1600rpm I'm surprised that the engine is still in one piece. 1.5ltr/min of water/methanol off boost would ****** up the ignition point big time as was apparent from the torque not even making an appearance until near 3000rpm.

I enjoyed my day though and had a nice breakfast bap from the cafe. I shall spend the week sorting the Waste gate and making the car ergonomic from the next RR operator.

Many thanks.

[graham a]

some great results there was the no 6 on the list a standard 280 vxr,as i had very similar figures with mine

[MAF 3.2 V6 GSi]

Not happy with those figures obviously, not seen a torque figure that low in years. There is a leak on the waste gate mount that might have slowed spool up a little but they did not listen to what I told them as usual. My car is not ergonomic and going full throttle at 1600rpm I'm surprised that the engine is still in one piece. 1.5ltr/min of water/methanol off boost would ****** up the ignition point big time as was apparent from the torque not even making an appearance until near 3000rpm.

I enjoyed my day though and had a nice breakfast bap from the cafe. I shall spend the week sorting the Waste gate and making the car ergonomic from the next RR operator.

Many thanks.

Good to see you again Carl, let us know how you get on at RS tuning next week

[KeefyB]

Had a wicked day mario, more than happy with my results, never expected that!! Cheers for organising it

[shb1988]

Not happy with those figures obviously, not seen a torque figure that low in years. There is a leak on the waste gate mount that might have slowed spool up a little but they did not listen to what I told them as usual. My car is not ergonomic and going full throttle at 1600rpm I'm surprised that the engine is still in one piece. 1.5ltr/min of water/methanol off boost would ****** up the ignition point big time as was apparent from the torque not even making an appearance until near 3000rpm.

I enjoyed my day though and had a nice breakfast bap from the cafe. I shall spend the week sorting the Waste gate and making the car ergonomic from the next RR operator.

Many thanks.

it's all positive criticism, no need to try and argue with every operator that tells you your car is running poor, take note, go away fix and go back and hope for the best....