Thanks: 0
Likes: 0
Upgrading a newer REC
Hello, I'm going to install new stuff in my 2003 vectra, so I'm upgrading the REC today.
My original one is a BB (2003) and the new one is FP (2006).
After connected and paired the new REC everything is working fine, but not the rear direction indicators. I noticed a different wiring in the new REC.
Can anyone help, please?
Out of interest, where on the REC did you find the unit model code (Side? Back? Top?)?
Thanks.
Hi, the REC model code is on the sideOriginally Posted by Gubmint Agent
One possible guess.... the BB unit being 2002 might be half-canbus while the later FP unit being 2006 might be full-canbus ??
yes right, I'm trying to turn my half can to full can. This new REC is from a facelift
I'm planning to retrofit autolights, powertailgate and alarm in my hatchback.
Power tailgate in a hatchback? A lot of people will be following that with interest I imagine, don't think anyone's done that yet.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
Isn't the alarm fitted as standard on all models anyway ??
Yes in the Uk, but not in a lot of the European ones (the OP is in Italy).
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
No, no one yet. It will need a lot of work, it's a little challenge
..guessing this REC is coming from a signum and rear lights are wired different to a vectra...who knows it?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks