My head hurts....park pilot questions

[John LE]

Right now i'm sitting in the living room surrounded by 16 parking sensors, 16 bumper mounts, 4 bumper looms, 2 dash switches, 2 speakers, 1 roof loom and 1 control control box

One kit came from a Signum and was send out by mistake so the ebay seller sent out the correct parts from the vectra but some of the bits from the vectra kit are missing so I am making up the full kit and sending whats left to the ebay seller.

So i've picked out:

8 sensors
The vectra bumper looms (front and rear)
The vectra roof loom
The control unit (assuming both cars use 13157260)
A pp switch
A speaker (both look the same)

Now here's where I need the help

I have picked out the sensor holders with the letters:

J-K-K-L for the rear
D-E-E-F for the front

Is that correct?

Are the facelift fronts different to the pre-face?


Now onto my final question.....where do the 4 wires on the black body loom plug go? I've figured out the 6 that go to the front for the front sensor but I need to know the other 4 (3 green and a green/brown)

Thanks in advance

[VXR Shaneo]

Hi John I'm in a similar predicament, I have different sensor fittings on the front and can't figure them out. I have the same as yours on the back. also I have been trying to search to make sure I have the right setup. Is the PP the same on pre-facelift and facelift ?

[John LE]

I take it you have the same set as my old car buddy....that was the retro fit bosch kit.

I am about to fit the full factory fit set onto my new car.

The facelift and pre-face have the same wiring but the signum and vec estate have different rear bumper looms

[andy.l]

Right now i'm sitting in the living room surrounded by 16 parking sensors, 16 bumper mounts, 4 bumper looms, 2 dash switches, 2 speakers, 1 roof loom and 1 control control box

One kit came from a Signum and was send out by mistake so the ebay seller sent out the correct parts from the vectra but some of the bits from the vectra kit are missing so I am making up the full kit and sending whats left to the ebay seller.

So i've picked out:

8 sensors
The vectra bumper looms (front and rear)
The vectra roof loom
The control unit (assuming both cars use 13157260)
A pp switch
A speaker (both look the same)

Now here's where I need the help

I have picked out the sensor holders with the letters:

J-K-K-L for the rear
D-E-E-F for the front

Is that correct?

Are the facelift fronts different to the pre-face?


Now onto my final question.....where do the 4 wires on the black body loom plug go? I've figured out the 6 that go to the front for the front sensor but I need to know the other 4 (3 green and a green/brown)

Thanks in advance

omfg


well were do i start and try help you hmmmm

[VXR Shaneo]

These are the gm numbers

Rear harness 24419054
Front harness. 13195866
Module 1318070

[VXR Shaneo]

Double post

[kenp]

John -> just sent you a pm with a bit of help (well maby)

[John LE]

omfg

well were do i start and try help you hmmmm

Thanks to the info Ken sent me I should be ok with the connections but any additional info will be handy, do you know the answer to the bumper brackets?

These are the gm numbers

Rear harness 24419054
Front harness. 13195866
Module 1318070

My module has a different number to that

John -> just sent you a pm with a bit of help (well maby)

Cheers Ken, that's answered alot of my questions buddy

[VXR Shaneo]

Someone please help me ?

[VXR Shaneo]

Cheers for the info john, my sensor holders look like the ones for the estate. I need hatchback ones, I wonder why my module number is different.