ive fitted my cd70 nav into my car.
ive installed the gps aerial but on the display the gps symbol shows a stroke right thru it as if its not working.
can anyone tell me or advise me whats up???
ive fitted my cd70 nav into my car.
ive installed the gps aerial but on the display the gps symbol shows a stroke right thru it as if its not working.
can anyone tell me or advise me whats up???
Strange mine goes red an green
paul.........ive not got the colour screen.
im just dunno what to do, ive tried setting a destination and driving and still nothing happening.
That means that there is no GPS signal, where did you get your ariel? I bought an ariel off eBay and it didn't work. I plugged the original factory GPS ariel in an it worked with full signal.
Ok mate fair enuf the problem is what top rod said mate is it a fakar aerial u bought
yep its a fleabay job...............any ideas where i'll get one that works???
i know vx will be really expensive
check the little pin at the back of head unit rab in might bent like my one was. i no its a silly question but do you have the sat navcable into the blue plug on the back hth
ive installed mine today but i got the loom and the arial fitted it and i have no probs found the signal with 5 - 10 mins
Does the front screen have some sort of anti gps coating on?
I have another gps sensor for my radar detector and its signal is rubbish. Hold it out the window and it gets signal within a minute.
I know on some cars the black bit around the mirror doesnt have this coating and gps items are placed up there.
about the coating, if you have heatreflective windscreen that would be some of the problem..
even if you dont have that.. you can have problems.. (if my car point north, i have rubbish signal, but pointing south its great..) so also metal can make you have problems.. (still trying to find a way to move my gps antenna outside and to the roof)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks