Edition100 brakes labour

[rockhopper]

Hi. Could anyone advise me roughly how many hours labour I should expect to pay for to have my front and rear discs and pads replaced? I am sourcing the parts myself but have neither the time, skill or equipment to do the change. Thanks.

[Rebellion]

Edition 100 brakes are no different to any other Vec with the same engine, BTW. Shouldn't take a pro with a lift/ramp more than 90 mins.

[shb1988]

Simple job, get e brakes off eBay where they are cheap and fit them yourself and save loads of money

[accveccysriturbo]

Dropped my mech £40 to do front and rear disks and pads earlier in the year for my 2.0 T

[rockhopper]

Cheers guys, I've been quoted £140 for a GM full disc and pad kit delivered from autovaux which seems ok to me. If worst case senario it takes 2hours labour then that's not a bad price for the whole hog.

[Bigtee]

Dropped my mech £40 to do front and rear disks and pads earlier in the year for my 2.0 T

He's too cheap £60.00 and no less tools cost money.

About 2hrs max for the job is fair.

[lee gsi]

Cheers guys, I've been quoted £140 for a GM full disc and pad kit delivered from autovaux which seems ok to me. If worst case senario it takes 2hours labour then that's not a bad price for the whole hog.

Join the club and have access to trade club prices.

Front disc and pad set from Vauxhall would then be about £75

He's too cheap £60.00 and no less tools cost money.

About 2hrs max for the job is fair.

I normally charge £20 hr if doing private jobs as I enjoy working on cars.

[accveccysriturbo]

My mech (I have two) are both family friends.

Will dig out my receipts think my pads and disks were like £60 for set

[yorkshireborn]

any where between £40 - £60 from a independent if you supply the parts.