Thanks: 0
Likes: 0
Can If fit wheels with an offset of 45 to my Signum
I have a set of aftermarket alloys that have an offset of 45 and were fitted to a Vectra 3.2. They dont seem to fit the Signum too well and i havent fitted them as the bolts dont want to go in easily. I wondered if the offset is wrong to fit to a Signum. Any ideas ?
The Offset range for the Vectra and Signum is 35 to 43. 45 means they are sitting right in the wheel arch so possibly that's the problem. Also you will have the added trouble when turning the steering wheel - the front wheels will rub on the wheel arch.
did you see them on the 3.2 or is it just what the seller said they were on
as it sounds like you mean the pcd if the bolts wont go in the last owner might of used i think their called wobbly bolts
my last set of alloys had a offset of 45 and they fit the vectra but were catching on brakes spent around £200 buying different sizes of spacers in the end just sold the alloys and kept my orginals and put 20mm spacers on
The chap I got them off said that they were off his Vectra 3.2 although I didnt see them on there! I just assumed that they would also fit a Signum. I also had the bolts of him so dont think he used wobbly bolts.
Im guessing that I do mean the PCD ? The wheels do fit on (with 5mm spacers) but just seems that the bolts dont sit in 100% snugly. Kind of feels that you have to put a little bit of force (which is when i thought I wouldnt bother)
Originally Posted by Herman Villa
do the bolt look the same as the orginals just a little longer if 5mm spacer are being used the bolts you will need will have to be 5mm longer than your standard vx wheel bolts to be safe
as a signum is a vectra its the arse thats different so vectra wheels will fit signum
the only difference i found was a 3.2 has bigger brakes on the front than other vectras
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks