Where are the boot grounds in the pre-face signum? Need a ground for my sub amp
Where are the boot grounds in the pre-face signum? Need a ground for my sub amp
Know there should be one where the wiring for a towbar come through..
Personally id make a new one.. did in my Vectra estate.
Took all floor lining out and ground paint away to reveal bare metal.. drill a pilot hole.. used self tapping bolt to get good bite. Did this in two places for each amp
In the estate there are two earth points just under the flap of the boot floor, behind the carpet trim under it. Not sure if the Signum's the same or not.
Last edited by Ian-Highlander; 12th December 2011 at 14:20.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
I would do what Blue Estate said get a much better conection did this in my hatch.
Cheers guys. I couldn't get the side panel out. so i took it to the bolt for the centre seat. Worked a treat.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks