Pairing Specs/Trims (Elite/SRI)

[UltraVec]

Wonder which parts am I missing.
Basically I'll have about a day to swap parts from a 1.9 cdti (120) Canbus facelift vectra c and put them into my 1.9 cdti (150) Half-canbus pre-facelift vectra c. The parts must be replaced tho so I'm wondering which parts can be swapped with minimum hassle?
Any help or how 2 pointers appreciated.

So far a quick brainstorm has led to:
The sun glass holder with the four switches. (Straight swap?)
The rear passenger roof light (will have to switch roof lining 2)
Front dash trim strip (is this a straight swap?) prefer the two tone.
Front and maybe rear vents.
What about the GID and CID?? read one or two threads about it. is it that complicated???

What am I missing, sure there's loads.
Anything else which would be possible in a day or two?
Thanks.

[UltraVec]

Anything?

[paulvectrac]

Carnt do dash trim they are different and the gid to CID is a no unless u wanna swap hea units and and do some wiring

[GazVXLINE170]

Full canbus screens need to be accompanied by the head unit they are paired to.

[Das]

Rear centre head rest, rear cup holders, rear interior light, centre console arm rest, drivers side coin holder, auto dimming rear mirror to name but a few. If you have a cdr2005 the GID is pretty easy to do, about a 7 out of 10 for difficulty.

[John LE]

No-one gonna mention the obvious one.....leather

[UltraVec]

Sound 4 the replies lads.
Was talking to the owner and she confirmed the sunglass holder + lights but said it doesn't have leather seats, don't all elites have leather? I thought they did, now I'm thinkin it may not be an elite at all.
Anyway I changed my HU to an Xtron td713 a while back, in order to change the CID to GID do I need both OEM HU's from the cars? Will search the how2's 2 see if I can change them myself.
Pity the dash trim isn't changeable.
Thanks 4 advice.

[neil3734]

My 07 SRi xp is missing loads of stuff my 54 SRi Direct had....

No Rear heaters
No Auto