Help: Parking Sensors

**qianjizhao** · 25th November 2011, 18:31

hi all
received CISBO parking sensors yesterday, there are 4 sensor spacers in the box.
Do I have to use them or not?
My car is a Signum.
Thanks.

**gibbon7000** · 25th November 2011, 18:36

I didn't have to use them on mine or my dads signum

**qianjizhao** · 25th November 2011, 18:42

Originally Posted by gibbon7000

I didn't have to use them on mine or my dads signum

what a quick reply.

Thanks for the information, I'll try install mine this weekend.

**Ben_** · 25th November 2011, 20:02

I did use them but only on the corner ones.

**Das** · 25th November 2011, 20:18

Spacers? I thought they were for fitting behind the bumper to lock the sensor in place?

**benholden2010** · 25th November 2011, 21:06

No need to use these matey if you fit them in the factory fit positions.

Fitted loads of these and never had to use them

**troutybrown** · 25th November 2011, 21:08

Sensors locked into place when pushed in on mine no spacers were needed

**lee gsi** · 25th November 2011, 22:36

The 'spacers' are for angling the sensors on bumpers that are not parallel to the road.

I had to use them on my neighbours MK3 Fiesta but not my Signum or wifes Corsa C

**aps** · 26th November 2011, 16:50

I used them on mine for a while , took them off and still works good .

**qianjizhao** · 26th November 2011, 22:39

installed parking sensors today.
fitted spacers behind the bumper to lock the sensors.
I didn't take any photo during the installation, but will take some photos tomorrow.