Originally Posted by
Ian-Highlander
Very easy although they probably won't provide a long enough lead with it so you'll need an extension.
Under the bumper on the passenger side there is a grommet that the cabling for the factory parking sensors goes through, you can use that. There's another one on the drivers side that's not used on my car at all.
These both come into the boot under the first hinged part of the false floor, just lift that and pull the carpet out and you'll see the other side of them.
Run the cables into the side pocket and down behind the passenger side bolster (you can take the rear shelf support off to give yourself more access easily, it's two screws). Pop the side trim along the passenger side and run it to the kick well and up behind the glove box.
Bookmarks