Engine cover rubber grommets

**tomo41** · 17th December 2011, 08:30

Mine ave split and can't put engine cover back on without em can u buy em? As the bolts just fall thro middle without em

**Bigtee** · 17th December 2011, 08:52

Vauxhall dealer open till 12 parts counter today.

**Damo77** · 17th December 2011, 15:30

For the Z19DT (8 valve) it is either
24453627 - STUD, 9.9 MM DIA., COVER TO CYLINDER HEAD
or
90412865 - BUSH, CYLINDER HEAD COVER CAP

Think the BUSH is for the front of the cover that the bolt goes through....

__________________________________________________ _____________________

For the Z19DTH (16 valve)

24453627 - STUD, 9.9 MM DIA., COVER TO CYLINDER HEAD

**paulvectrac** · 17th December 2011, 16:09

Nice one mate but he has a z20 net lol

**solorider** · 17th December 2011, 16:24

Originally Posted by paulvectrac

Nice one mate but he has a z20 net lol

in that case then the rubbers are not available as a seperate part,you have to buy a new cover

**Vectra Meldrew** · 17th December 2011, 19:50

oops, read it too quickly thought it was for a cdti

**11mallard** · 18th December 2011, 11:14

I've got a 1.8 and mine split. Went to breakers yesterday as I need a few bits and found some on an Astra and a Vectra that were perfect.Total cost for Cam sensor plug and wire, Interior Rear Light and ribbon wire, cover gromets and brass inserts for engine cover and a Drivers Door window/boot lock/mirror adjuster control unit all for £10.
Don't buy a cover go to a good breakers.