Hello,
I have a set of bbs lm alloys in 19: they are 5x112 and the vectra is 5 x 100 does anyone know anyone that can make adapters to get them to fit ??
Cheers
Ray
Hello,
I have a set of bbs lm alloys in 19: they are 5x112 and the vectra is 5 x 100 does anyone know anyone that can make adapters to get them to fit ??
Cheers
Ray
The Vectra has a PCD of 5 x 110, not 5 x 100.
You can use wobble bolts that will allow adjustment of the PCD by 2mm in either direction. (5 x 108 or 5 x 112)
Last edited by 4ndy; 15th November 2011 at 23:07. Reason: Missing Information
ah sweet i have some wobble bolts awesome
You will just need to ensure the centre bore is the right size (or larger and use a spigot ring) and the offset is correct.
yh i will check that dont surpose you know that info the vectra?
Yep bore size is 65.1 mate pcd 5x110
The offset (stamped et on the inside of the wheel) should be between 35 and 45mm. Use a wheel offset calculator to compare the new wheels to what you already have.
My current wheels as an example are 8" wide and have an offset of 42mm.
I nearly bought a set of Brabus wheels that were 8½" wide with an offset of 32mm but they would have stuck out of the arches by an extra 16mm and further away from the suspension by 4mm.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks