Hi, could someone with a Haynes manual write down the torque ratings for cambelt tensioner, water pump bolts, roller, and the 4 flywheel bolts? Many thanks
Hi, could someone with a Haynes manual write down the torque ratings for cambelt tensioner, water pump bolts, roller, and the 4 flywheel bolts? Many thanks
what engine are we working with rob
What an idiot, i do apolagise, long day, its a Z19DTH 1.9 cdti 150.
Also does anyone know much is the total litreage of the coolant system? After doing the belt just need to know how much of neat/water needs to go in and does the bumper have to come off to do a full flush.? Many thanks
crank pulley bolts 25nm
engine mount 55nm
water pump 26nm (using new bolts)
cooling system holds 7.5 litres
crank pulley bolts 25nm
engine mount 55nm
water pump 26nm (using new bolts)
cooling system holds 7.5 litres
These are for the Astra but should be the same.
As above and.....
Timing belt idler bolt 50,
timing belt tensioner 30,
(crank pulley bolts) vibration damper 25,
Aux tensioner bolt 50,
Aux idler roller 50 - this is attached to the block mounting bracket (as well as the second one next to the AC comp) on the Astra probably the same on the veccie.
Last edited by bb_cdti; 10th November 2011 at 11:44.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks