after getting 2 new rear hubs fitted do they need reset or what could be wrong
after getting 2 new rear hubs fitted do they need reset or what could be wrong
Oh dear, there are two types, looks like the wrong type is fitted and hence the ABS module is not receiving a signal from the hub
normally the ABS should clear when the fault is rectified, you need to get it read by opcom/tech2 to see what its reporting is wrong
Plasma's Tech2 services are now open and able to provide services
Just had a thought, isn't this the same as when you spin your car on ice
The Traction Control gets confused so disables itself
You then need to drive on a solid surface for about 3 miles, switch the car off, then back on again, and all is solved
Try that
i drove 22 mile home in it and still the same , the man is going to read it on Friday
does this mean 2 different hubs i have been told they are all the same on the rear
Not there are two types of hubs for all model types
I thought they were same too
Only one type listed and showing on EPC
Plasma's Tech2 services are now open and able to provide services
i will see what the computer say,s on friday and report back
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks