anybody know how to replace the track rod on a vec c z19dth?
cheers
anybody know how to replace the track rod on a vec c z19dth?
cheers
You on about the outer one. Or the inner one attached to the rack its self?
Outer ones are about half hour job. Inners will be more of a pain. An you'll need a big f type or similar
yes inner one m8
is it subframe off?
No should be to it. But obviously will bea bit tight for movement.
There's tools available on eBay or wteva. That might make it easier.
cheers pal
No worries mate.
From what I believe job to be.
Remove front wheels. Pop of track rod ball joint. Remove steering gaiter and should reveal a big nut. Undo that and should come off.
Try and count / measure threads so that wheel alignment adjustments will only be slight
wil have to be tracked anyway as the track rod snapped after a bump
Have you checked wishbone, sun frame etc. as must of been some bump to snap it :-S
sub frame been replaced, wish bones appear to be okay
Fair enough. Defiantly worth having a full geometry check once it's sorted
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks