User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Signum 1.96cdti 120bhp

  1. #1
    New Member edwardjames's Avatar
    Join Date
    Aug 2011
    Location
    Doncaster
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default Signum 1.96cdti 120bhp

    Hi,

    Only my second post so here goes!!!

    I have a Signum 1.9cdti 120 8v 2004 (which I wish I had never bought especially as it should have been a 150bhp 16v but thats another story!

    Since Ive owned the car I have had loads of problems starting and have had a new battery and checks done but the car still struggles to start especially when cold. It also seems very sluggish although I did put this down to the fact that it was only the smaller bhp model but I am sure its running well under powered.

    The car has only covered 70k and has service history.

    Can anybody help or suggest? Should I check the EGR and would it cause these sort of problems?

    Any help or suggestions would be appreciated.

    Thanks,

  2. #2
    Regular Member Damo77's Avatar
    Join Date
    May 2010
    Location
    Petersfield, Hampshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra

    Trim : SRi

    Engine : 1.9 CDTi 8v

    Year : 55

    Mileage : 92,000

    Default

    Hi Ed

    Sounds a little similar to me when I first bought mine..... Having moved from a V6 mondeo with 181bhp down to my Vectra 8V it was like riding a slug lol

    Seems that the cold start issue is quite a common issue witht the CDTi's.

    First place to begin I suppose would be to try cleaning the EGR valve and Boost sensor (cheapest place to start) then perhaps look at the glow plugs and make sure they are all functioning and receiving voltage. Then if none of those work it may be worth checking the injector leak-off pipes....... after that then possibly injector seals (copper seals).

    So wish I had bought the 150 as well lol

    Anyway best of luck and hopefully some of our more knowledgeable folk may be able to cast a few ideas your way

    Damo

  3. #3
    New Member edwardjames's Avatar
    Join Date
    Aug 2011
    Location
    Doncaster
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Thanks For yor reply Damo!

    I will give these a try.

    James

  4. #4
    Regular Member
    Join Date
    Jan 2011
    Location
    lincolnshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    valve clearance is something else to check

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help Please - Signum 1.9 cdti 120bhp
    By T111mts in forum Vectra C / Signum Troubleshooting
    Replies: 3
    Last Post: 17th February 2013, 19:10
  2. 1.9 8v 120bhp MPG Help... Its bad...
    By Vectra Adz in forum Engine & Drivetrain
    Replies: 16
    Last Post: 26th July 2012, 22:21
  3. 2006 1.8 120bhp Signum,which front exhaust section?
    By gilmour182 in forum Engine & Drivetrain
    Replies: 10
    Last Post: 7th July 2011, 00:55
  4. Signum 1.9 CDTI 120bhp
    By Lump in forum Cars for sale
    Replies: 5
    Last Post: 11th March 2010, 14:56
  5. Signum 1.9 CDTi 120BHP or 150BHP
    By dazzh in forum Vectra C / Signum Car Chat
    Replies: 4
    Last Post: 28th February 2006, 10:39

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •