150 CDTI Owners help

**leeds vectra** · 3rd November 2006, 10:42

All,

Had the cdti now a couple of weeks just about getting used to it now. Just one little niggle though. My clutch bite point seems to be a bit low. It's just below the half way point of the pedal travel. The gear change also seems a bit notchy especially at low revs.

Can cdti 150 sri owners post up there opinions on the gear change and the bite point position just to give me an idea.

Cheers,

Paul.

**AJA** · 3rd November 2006, 10:56

The gear change on mine is sometimes notchy when cold. Get it into a dealer mate, as it may need tweaking.

Your clutch bite seems OK to me dude. Mine is around the half way mark.

**leeds vectra** · 3rd November 2006, 11:03

Yeh it feels that way alex, as though it needs re-aligning a bit. More prominent at low revs, eases a bit at higher revs. I'll settle for the clutch as it is.

Cheers mate.

**Beavis** · 3rd November 2006, 11:13

only thing I have noticed on the new one is that it sometimes struggles to get 1st when stopped/slowing down other than that deffo a different feel to the 2.2 but better
sorry not much help Paul!!