Window regulator is same or different ?

[SandyGBR]

Hello All,

Almighty crack from my 56 plate facelift Vectra when I closed the door and the window fell in.

Taken the door card off and the window regulator has snapped where the rivet holds it to the door. Rivet is still in place.

Don't know whether to try and get it welded (not a job for me) or replace it.

Ebay has OSF regulators for 02-05 Vectras.

Anyone know if they fit the facelift model like my 56 plate ? Assuming it does but want to ask before I buy one.

Has more problems in 5 months with this 56 plate 2.2 petrol than I had in 5 years with my previous 04 plate 1.9 CDTi 150. Mental !

Thanks

Sandy

[hadiislam]

pretty sure the regulators are the same as there is no difference in the doors between the prefacelift and the facelift models so my thoughts would be they are exactly the same...

someone correct me if i'm wrong

[Ian-Highlander]

The regulators are identical throughout the range (hatch/saloon/estate/pre-face/facelift) the only bits that change are the rear door wiring looms (the estate one is longer because the rear door is longer).

[SandyGBR]

As suspected...thanks chaps.