Chrome Exhaust trim

[hendrix]

Evening folks,
When I bought my Signum Design the garage put a new back box on, but put a cheapo oem box without chrome pipe WHY?? anyway.

The pipe faces downwards to the ground, which is a bit of a nuisence, so its looking like ill have to angle grind the downpipe off to fit an oval chrome pipe.

Just wondering if anyone has any better ideas, or also where the best place to get an oval pipe that will fit correctly.

Much Appreciated.
Ian

[Deztroyer]

they might not have fitted a "chepo" back box ...but one from an elegance which does not have a rear skirt and therefore no embellisher was needed ...

when i had my 2.0T signum it started life as an Elegance and i fitted the rear skirt from a design, then had the rear folded down pipes cut off and finishers of my own request fitted ... then 6 months later i had a full stainless cat back system fitted with the same finishers i'd already got

[soulman]

check on the bay of fleas ...you should find what your looking for on there .

[hendrix]

cheers guys, tis a small issue but annoying never-the-less, if theres a hole i wanna fill it lol.