Any one used koni adjustables on the rear of vec 'c', thinking of fitting , standard shocks done 22,500 miles their ok ,but get bottoming out at times, any thoughts ,comments welcome
Mac
Any one used koni adjustables on the rear of vec 'c', thinking of fitting , standard shocks done 22,500 miles their ok ,but get bottoming out at times, any thoughts ,comments welcome
Mac
guess not!
I've got them!
Excellent bit of kit, especially with eibachs fitted. Its only ride firmness that is available to adjust, not height. (I've got mine set to the firmest as theres zero pot holes in my area)
Anything specific you wanted to know?
(Not available for the C? They are most definitely available.)
Last edited by Vectra_C_Chris; 15th August 2011 at 00:23.
Thanks Chris, www.larkspeed.com vectra -c £85.00 per side. Have run different shockers on different Vauxhalls over the years ,thought i'd try something different. I doubt i'll be running them full up roads are c##p here ,just want to stop it bottoming when 4 up. will try 2nd setting first and take it from there.
Mac
Its a little hard to be accurate with the adjustment on the koni's IMO. They just supply a knob to turn the little widget on top of the struts. Theres no clicking or uniform position for them. So it took a bit of tweaking to feel that both sides were even.
Good luck mate, seems like a good price for them anyway.
thanks again chris,i assumed they worked on ratched system like others,will count the turns.
What's the lowest drop a c can take without botteming out
I fitted front+rear KONI sport with Eibach pro-kit (-30)
I would say that It's something you must have
comparing with stock handling became outstanding
Koni's arriving tuesday, having to come from holland,chris no widget these have to be adjusted before install.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks