Well took me hour and bit bulbs just didn't go in a just hope they are cliped in anyone else had this problem tryed ajusting the clip still wouldnt go
Well took me hour and bit bulbs just didn't go in a just hope they are cliped in anyone else had this problem tryed ajusting the clip still wouldnt go
No took me 5 mins all in
Where'd you get the kit m8, and which clip you talking about? is it the one that holds the bulb in?
When I fitted mine I used the clips with the kit as they had a slot cut out, but you may be talking about a different bit. If possible a pic would help.
Got them from hid direct car is facelift and its to hold the bulbs in the bulb just seems to pop out no matter how much force a use it won't go in to postion
Only pre-face require the separate clips to hold in the HID bulbs.
Facelift should just push in and lock into position. Sounds like you need to take the headlights out and take a proper look. While you're at it, you could mount the ballasts in the dedicated slot under the headlight assembly.
Yer they just push in but don't sit right and just POP out do I do sumit to the retainer clips its because the bulbs have plasic base ain't it
Slot the bulb in and clip it with the original clip that's on the headlights
No a havnt but was the same on both sides just Wont hold them in a got old hid bulb which is a h7r tho with metal base and went in no problem
Hi m8, went out to sort my lights and took a picture for you to compair. You can see the two clip parts at the top and bottom, these are wahat hold the bulb in place. It may be that these have flattened out on yours which would explain why the bulbs pop out.
I'd suggest lowering the bumper and taking the headlights out, only a ten minute job to be honest, then you'll be able to see what's what.
Hope this helps.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks