User Tag List

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: castor and camber

  1. #1
    New Member
    Join Date
    Mar 2010
    Location
    DARLINGTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default castor and camber

    hello all i have had a problem with my 06 vedtra 1.9 tdi 150 the rear yyres were worn on the inside wall so much that it had got down to the ribbon on 1 tyre.had tyres from quickfit they were going to check the toe ,on the ramp 2 springs were broke on the drivers side . i have replaced all 4 springs took it back to kwick fit today they have a top of the range machine he has rectified the toe but i have a computer readout

    front left castor 4.44 deg
    camber -2.16

    front right castor 6.07
    camber in the green -0.56

    rear left toe -1.20 camber -2.10

    rear rigt toe 0.30 camber in green -1.60

    kwick fit told me that on the computer you can not adjust castor and camber drove the car for test drive pulling to the right when i let go of the wheel they gave me a full refund and said it was a mian dealer to sort out any help please living in darlingto north east

  2. #2
    Regular Member m8internet's Avatar
    Join Date
    Dec 2006
    Location
    Cumbernauld, Scotland
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    The camber can be adjusted, they just need to know how
    The response from Kwik Fit kind of says it all
    Equally, even my local VX dealership cannot check and adjust camber, they don't have the equipment for doing this

    Find another outlet with Hunters equipment, they should be able to perform the required adjustments
    When phoning up, simply ask if they can adjust the camber settings on a Vectra C

  3. #3
    New Member
    Join Date
    Mar 2010
    Location
    DARLINGTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    many thanks for your help m8inernet

  4. #4
    Regular Member
    Join Date
    Jan 2011
    Location
    lincolnshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    kwitfit in scunthorpe have just bought the Hunter mutts nuts machine , £125 for full camber , castor and allignment check

  5. #5
    Regular Member
    Join Date
    Jan 2011
    Location
    lincolnshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Quote Originally Posted by kevinjm View Post
    many thanks for your help m8inernet
    just curious mate , are your front tyres wearing ok ??

  6. #6
    Regular Member lee gsi's Avatar
    Join Date
    Mar 2010
    Location
    Hampshire (Near Havant) . .Drives: Signum 1.9 CDTi
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Signum

    Trim : Design

    Engine : 1.9 CDTi

    Year : 2005

    Default

    Quote Originally Posted by bembo449 View Post
    kwitfit in scunthorpe have just bought the Hunter mutts nuts machine , £125 for full camber , castor and allignment check
    What a rip off.

    Go to www.alignmycar.com and find some garage with the same equipment. Mine cost £45 to be done.

  7. #7
    New Member
    Join Date
    Mar 2010
    Location
    DARLINGTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    front tyres ok bembo449

  8. #8
    New Member
    Join Date
    Mar 2010
    Location
    DARLINGTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    just checked your link lee gsi many thanks there is a garage in stockton 8 miles down the road ringing them in the morning to book in cheers for all of your help

  9. #9
    New Member
    Join Date
    Mar 2010
    Location
    DARLINGTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default castor camber update

    many thanks for all your help took my car to tyre exchange stockton to get all my allingment done waited a hour machine was freezing to it a few miles down the raod to middlesbrough 25 mins alter all done with the hunter machine and the put 70kg on both front seats KWICK FIT DID NOT he had to adjust front toe £45 for it to be done but for the messing about £30 well happy would recomend tyre exchane and hunter machine as i said many thanks to this forum for all your help STEERING ME IN THE RIGHT DIRECTION (what a pun)

  10. #10
    Regular Member
    Join Date
    Jan 2011
    Location
    lincolnshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    so you can feel the difference ??

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Camber? Camber Kits??
    By RyanNI in forum Handling & Braking
    Replies: 5
    Last Post: 13th December 2010, 11:11
  2. camber kit
    By andy76 in forum Vectra C / Signum Car Chat
    Replies: 0
    Last Post: 17th August 2009, 09:23
  3. Castor camber settings
    By goonturbo in forum Suspension, Wheels & Brakes
    Replies: 7
    Last Post: 6th March 2009, 01:16
  4. camber
    By linley85 in forum Handling & Braking
    Replies: 11
    Last Post: 30th November 2008, 15:05
  5. Camber
    By Daywalker in forum Handling & Braking
    Replies: 0
    Last Post: 22nd June 2008, 10:46

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •