Hello all. I'm new to this forum as I just bought my 08 vectra last week. I was hoping someone might be able to help me with the install for a parrot mki9200 hands free kit.
I've been following this guide: http://www.vectra-c.com/forum/showthread.php?t=15158
I'm seem to be unable to get any power to the parrot (screen won't come on). I'm using a SOT122 lead. I'm hoping it's not a dodgy lead and I'm not sure of the best way to test this.
With everything wired up the radio works, so at least I know the sound is being passed through the parrot box. I'm not sure about the power. I have swapped the two fuse connectors (connect orange to red, etc), and have tried connecting the loose orange wire from the SOT122 to the black wire of the cigarette lighter. Do I have to connect the red wire anywhere or does this come through from the radio?
Another thing I'm not sure of is the mute. I connected the loose pink wire from the SOT122 connector into the back of the other SOT122 connector which then seems to route through to the mute 2 of the parrot connector. Not sure if this is correct, but I should at least still be able to get power?
Can anybody suggest what I might be doing wrong, and what is the best way to test the connections are good? I guess I need a multimeter?
Thanks in advance!