Hi all
just went to change my bulb and pulled it out.
Now are there any wires attached to the metal plate?
Thanks: 0
Likes: 0
Glove box
Hi all
just went to change my bulb and pulled it out.
Now are there any wires attached to the metal plate?
What do you mean? there should be a plug attached to it..
let me take pic
this here
Look behind the glovebox to the right, there will be a plug with two wires on it that fits that
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
cheers ian all i see is 2 orange wires which looks like it would be hard 2 put them on this
If you've taken the light out without removing the glovebox and not been careful, the connector has probably fallen down inside. Only answer is pop the glove box out (3 torx screws at the top and two at the bottom), pop the light back in and re-connect it as you slide the glovebox back in.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
agh ok cheers m8Originally Posted by Ian-Highlander
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks