any ideas on this no codes up
any ideas on this no codes up
any rattles and so on
no its spot on mate plenty of power just lumpy running
i have this at the moment as well mate, i quickly wiped the inside the throttle body (not a proper clean/wipe) and it settled it back down.. I plan to give it a proper clean out this weekend, there was not much dirt in anyway, i only really wiped the edges of the butterfly valve so far and noticed a difference.. try it, its a free easy fix if it works for you.. nothing to loose
Have you checked all the intake pipes/hoses are secure/tight?..sounds like an air leak.
May be worth you taking off the main intake hose and cleaning the throttle body with carb cleaner and a toothbrush
I've also sprayed carb cleaner down the intake pipe ,after the maf..n sumat like redex run thru it for good measure..
Ohh n id have someone helping you wen u clean the throttle valve..ie after you,ve sprayed/used the toothbrush method(both sides of the plate and anything else you can see)get the person to start car,it may keep on stalling, whilst you spray cleaner through..
Amazing amount of white smoke n crud outta the exhaust!!
N i use the real cheapo carb cleaner from screw fix..
did you sort this lumpy ticker over issue yet mate?
no nige still doin it found my lambda sensor in engine bay were loose thought id fixed it but no its same going to swap the sensor tues see if it sorts it
keep us updated on how you get on, seems to becoming a common thing..
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks