im changing a coilpack in this car tomorrow, will the eml light go off automatically, when problem is cured. also wil my obd2 handheld scanner read and clear the codes (some cars it wont work on). also anyone know where the port is
tia Paul
im changing a coilpack in this car tomorrow, will the eml light go off automatically, when problem is cured. also wil my obd2 handheld scanner read and clear the codes (some cars it wont work on). also anyone know where the port is
tia Paul
Should clear after a drive.
Disconnect battery for half hour.
cheers
Try to clear the codes with you reader, the OBD2 port is at the bottom of the centre dash console (in front of the gearlever)
If not, as already said, disconnect the battery (make sure you have the stereo code before hand tho)
its ok i cleared the codes with my reader after i changed tthe coilpack turned back on and was the same. so swapped the coilpacks back, mate had enough took to the local garage, and got a phonecall saying the cam shaft had snapped! the recovery guy had diagnosed as the coilpack.
Sounds like a 1.2 engine Corsa
correct 1.2 shocking thing is, it has only done 50k
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks