Been a busy old day got the SRi spoiler off and fitted the new VXR spoiler and then fitted the new ACE wheels and re-painted the calipers
Will post some pics if I work it out!
Been a busy old day got the SRi spoiler off and fitted the new VXR spoiler and then fitted the new ACE wheels and re-painted the calipers
Will post some pics if I work it out!
sounds good mate, would like to know how you fitted your vxr spoiler, i have one sitting in the box waiting to be put on, decieding whether to do it myself or pay someone to do it, how did you mark it up etc, i would get the tiger seal too if i did it, did you take all the self adisive strips off in one go or in stages? looking forward to seeing your pics
Simple to do mate
Offer the spoiler upto the boot.
Fix it with a couple bits of tape
Rip of 6 bits of masking tape for the top and bottom around 2" long. Place these along the edge of the spoiler at various spaces making sure you do the ends.
Remove the spoiler
You now have equal spaced out bits of tape were the leading edges of the spoiler was.
10-15mm INWARDS from those bits of tape place a dollop of tiger seal on both faces of the boot
Take all the tape off the spoiler from the sticky tape
Fit it on and press it down and tape into place removing any excess glue with white spirit
I left mine a day to dry and then ran a silcone bead around the whole spoiler and wipe of any excess with baby wipes
A lot of people cover the spoiler in glue this is a total waste of time as a spoiler never has 100% contact with the boot unless it is a little lip spoiler. Normally its just the leading faces like the VXR
Just realised your in Ipswich if you get stuck I'm only in Norwich always welcome to pop over and I'll give you a hand
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks