Best products for ultra blue!

**mann3210** · 29th March 2011, 09:21

whats the best products i should use for my ultra blue vectra? iv got loads of auto glym products! & turtle instant wax,i dont have any sealer,clay bar etc so what & where will i get these items?

**bobssignum** · 29th March 2011, 10:05

For a clay try this with the bilt hammer clay bars you can use it with just water .http://www.elitecarcare.co.uk/autoclay.php?cPath=79
And for a sealing kit you wont find anything better than this
http://www.chemicalguysuk.com/Chemic...t_p/radkit.htm
I will be interested to know what products you allready have as you will almost certainly need a paintcleaner
/swirl remover product along with a polish /glaze product

**bigmac** · 29th March 2011, 10:11

I used megs clay bar with blackhole and dodo juice blue velvet with good results

**mann3210** · 29th March 2011, 10:32

i dont think i have paint cleaner or swirl remover! what should i go for?

**bobssignum** · 29th March 2011, 11:03

Originally Posted by mann3210

i dont think i have paint cleaner or swirl remover! what should i go for?

For an all in one product i would go for mequiars ultimate compound If you allready have Auto glym srp then i would use just use mequiars swirl remover ,this way you can use ultimate compound or the swirl remover to clean up the paintwork after claying , and it will prepare your paintwork for the next stage -polishing at the same time. both the mequiars products can be bought from halfords or from the two site i linked to earlier

**mann3210** · 29th March 2011, 11:26

so id need claybar, auto glym super resin polish & megs swirl remover or megs ultimate compound instead of auto glym & megs swirl remover? & what order should i apply them?

rinse car
shampoo car
rinse car
claybar
chamios
then.....

**bigmac** · 29th March 2011, 11:27

Dont use a chamois buy a drying towel mate

and after claying wash car again then dry with towel then use megs swirl remover

**mann3210** · 29th March 2011, 11:42

sorry iv got a drying towel, so after rinse,claybar then rinse then dry towel then megs swirl remover (do i machine this on?) then auto glym auto resin polish then wax?

**ScotsDragon** · 29th March 2011, 11:57

This is what i used on my ultras blue,

Wash
Remove Tar (Autoglym Tar Spot Remover)
Clay (Bilt Hamber)
Wash
Megs Ultimate Compound
Autoglym SRP
Poorboys Black Hole Glaze
2 Coats Collonite 476s Sealant

Here is the results
http://vectra-c.com/forum/showthread.php?t=133618

**mann3210** · 29th March 2011, 12:09

a bit of luck iv got the auto glym super resin polish along with the deep shine polish! so now all i need is some sort of wax, im thinking the auto glym wax & bilt hamber clay bar!