arm rest vent?

**larrygroke** · 16th March 2011, 22:51

hey all does anyone know where i can get the air vent for the arm rest at the back?

regards

Larry

**shb1988** · 16th March 2011, 22:53

i've seen them on ebay but i'm curious as to whther mine will have the set up to allow air to the vents?

**larrygroke** · 16th March 2011, 22:54

to see if its set up pop open the rear cig lighter socket and then the gap which mine is will come off and you should see a pipe coming up through! can you see any on ebay at the moment i cant find one anywhere?

**shb1988** · 16th March 2011, 22:56

so i have to take the rear sig lighter out or will i be able to see through?

here is one

quite cheap too

http://cgi.ebay.co.uk/VAUXHALL-VECTR...#ht_1009wt_905

**larrygroke** · 16th March 2011, 23:02

if you use a small screwdriver you can just pop out the whole plate with the cig lighter on and if you move it to one side and look through the gap which you have made by removing it you should see a pipe hope this helps

**larrygroke** · 16th March 2011, 23:03

that arm rest you have seen u can pop the vent out also!

**shb1988** · 16th March 2011, 23:03

excellent cheers i will have a look

**larrygroke** · 16th March 2011, 23:04

no probs!

**Penfold101** · 16th March 2011, 23:05

Beware that people have tried retrofitting them but found there simply isn't any flow - the models which have it from the factory have a different and more powerful blower motor I believe. If you take it apart and find the pipework underneath you might be lucky, but it's worth checking the flow that comes out of it first before you buy anything...