Front indicator bulb

[Mopar Man]

On a Vectra C I'm ashamed to ask this really.
My n/s/f indicator bulb needs changing and i cant see how you get to it?

[matt450]

unclip the washer bottle tube where you put the water in. then pull the tube out of the bottle then you can get your hand in to get to the indicator bulb out

[Dre]

if you have the facelift model then you will need to drop the bumper

[Mopar Man]

sorry it is a face lift.

[matt450]

unclip the washer bottle tube where you put the water in. then pull the tube out of the bottle then you can get your hand in to get to the indicator bulb out

this is what the hand book saids to do mate

[Dre]

there are 2 bolts in the wheel arch on the lip of the bumper and liner then a further 2 underneath the bumper on the corner at the front will need to be removed they are torx 20 or 25 , you will also need to remove the 4 nuts along the top of the grill with the bonnet open this should allow you to drop the one side enough to get in and remove the headlight so you can get to the bulb

hth

[Mopar Man]

there are 2 bolts in the wheel arch on the lip of the bumper and liner then a further 2 underneath the bumper on the corner at the front will need to be removed they are torx 20 or 25 , you will also need to remove the 4 nuts along the top of the grill with the bonnet open this should allow you to drop the one side enough to get in and remove the headlight so you can get to the bulb

hth

This is what i thought. Lot of work for a bulb change.

[Dre]

tbh it sounds harder than what it is i removed a bumper within 10 mins, the vec c bumper is easier to remove than the previous vec b