Chrome front number plate surround needed

**Steves-Vec** · 1st March 2011, 16:58

Anyone know where to get a chrome front number plate surround or chromed/colour finish surround that fits the recess on the front bumper? As the one that is on my car was already fitted when i got it. I can see the previous owner made some adjustments to make it fit (ok-ish) but its looking worn and odd flakes where its plastic covered chrome. Was after as straight fit replacement or one that only needs minor adjustment if anyone can point me in the right direction, found a few Vectra ones advertised but none that specify they are a straight fit/replacement. Thanks in advance for any help you can give

**bigboynigs** · 1st March 2011, 17:20

should be able to get them easy enough off fleabay.

you can get the proper Irmy ones or pretty much any other finish you could want. all the ones i've previously had have just screwd on with no problems at all

**ryhnok** · 1st March 2011, 17:56

hi mate ive just orderd a front curved one to fit front bumber from e bay find them here

assion_automotive its got the vxr logo on too

**ryhnok** · 1st March 2011, 17:58

soz its passion_automotive on ebay...slip of the fingers on keyboard hope this helps

**Steves-Vec** · 1st March 2011, 18:02

Hi thanks for the replies, and have you got a link to the curved one you got? Was just concerned about standard ones being slightly oversized or not sitting properly etc as i see a few others in the past have had to make slight alterations. Would rather a straight fit, but if most will fit thats fine then.