Range display stays at 0 miles

**MarkP** · 15th February 2011, 15:33

I reset the trip computer, mpg etc on my cdti sri by holding in the button on the steering wheel. The range now stays at zero miles left, even though i filled the tank.
Anyone any idea what could be wrong?

**Big Sig** · 15th February 2011, 15:39

Are you sure your looking at the range left?

**MarkP** · 15th February 2011, 15:42

Yup. Everytime i start the car it warns me about the 0 miles!!! Has previously been ok til i held that damn button in to reset the stopwatch etc.

**Deztroyer** · 15th February 2011, 16:16

disconnect the battery for 10 minutes ..... hopefully hard reset will sort the issue......

but make sure you have your radio code if needed

**Vectrarmand** · 25th February 2011, 13:38

Originally Posted by deztroyer

disconnect the battery for 10 minutes ..... hopefully hard reset will sort the issue......

but make sure you have your radio code if needed

I did that recently and my radio never asked for a code .... how come?

**john_k_sri** · 25th February 2011, 13:50

Originally Posted by Vectrarmand

I did that recently and my radio never asked for a code .... how come?

You've got a facelift. Radio is not coded.

**Big Dave** · 25th February 2011, 13:50

Originally Posted by Vectrarmand

I did that recently and my radio never asked for a code .... how come?

Because your stereo is coded to the display. It only needs a code to marry it up another display (and would need divorcing first - again with the code).

Halfcanbus cars need the stereo code.
Fullcanbus don't.

halfcanbus - 6 buttons on the steering wheel.
Fullcanbus - 2 scholl wheels, and 4 buttons.